Round Watch 240×240 1.28-inch Display Module – GC9A01A
PKR 1,520.00
Description 1.28″ Round LCD Display Module with embedded GC9A01 driver, using SPI bus Comes supported by ESP32 variants, Raspberry Pi, Arduino, STM32 MCUs.
Description
Description
1.28″ Round LCD Display Module with embedded GC9A01 driver, using SPI bus Comes supported by ESP32 variants, Raspberry Pi, Arduino, STM32 MCUs.
Technical Specifications
- Display Size: 1.28 inch
- Resolution: 240 (h)x240 (v) resolution, 65K RGB Colors
- Dot Pitch: 0.135 (h) x 0.135 (v)
- Active Area: 32.4mm
- Color Arrangement: RGB Vertical stripe
- Interface : SPI digital interface
- Driver IC GC9A01
- Luminance: 400 (typ) cd/m2
- Viewing Direction: All view – O’Clock
- Backlight: 2 white LED parallel
- IO Level: 3.3V
- Operating Voltage: 2.65V ~ 3.3V
- Max Operating Current: ~40mA
- On board Regulator: None
- Operating Temp: -20C ~ +70C
- Storage Temp: -30C ~ +80C
- Mounting Holes : Yes
- Module Size: 45.5 (H) X 48 (V) X 11.5 (D) mm
- Current draw: Need to check
Pinouts
| VCC | Power |
|---|---|
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
[!]Warnings
- The I/O of the Display Module is 3.3v voltage , so you should not directly connect it to the 5v voltage I/O. IO level translator or series limiting resistors should be used.
Documents and Downloads
- Display Driver GC9A01 Datasheet
- GC9A01 Library for Arduino
- Youtube video Using the GC9A01 1.28″ Color TFT Display
Package Includes
- 1x Round Watch 240×240 1.28-inch Display Module – GC9A01A (Tested / QC-OK)
